Connecting Using The Wps Button On Your Router - JVC RA-D58B Instruction Manual

The Daylight saving screen will now appear, here you can
choose if the set daylight saving ON or OFF.
/
8. Turn the
Then press the
9. Select YES and then press the
to keep network connected.
The display will show "Please select Wlan region?" and
then the Wlan region menu. Turn the
SELECT dial to select the region, and then press the
SCROLL/SELECT dial to confirm.
Your radio will now scan for your wireless network, this may
take a few seconds then a list of all the wireless networks will
appear on the screen.
10. Turn the /
wireless network. Then press the
dial to confirm.
To connect your radio to your router using the WPS button follow the instructions
below (Connecting Using the WPS button on your Router).
To connect your radio to your router using your password follow the instructions
on the next page (Connecting Using Your Wireless Network Password).

Connecting using the WPS button on your router

Connecting using the WPS (Wi-Fi Protected Setup) button on your router is a quick and easy
way to connect your radio without having to type in a password.
If your router has a WPS button you will notice [WPS] at the front of your network name.
If you don't see your wireless network scroll down to rescan and try
again or you may need to move your radio closer to your wireless
router, the closer the better.
/
9. Turn the
button' then press OK.
You will now see a message on the screen telling
you to press the WPS button on your router.
SCROLL/SELECT dial to select ON or OFF.
/ SCROLL/SELECT dial to confirm.
/
SCROLL/SELECT dial to select your
/
SCROLL/SELECT dial to select 'Push
SCROLL/SELECT dial
/ SCROLL/
/
SCROLL/SELECT
OR
Daylight saving
Daylight savings
ON OFF*
Network settings
Keep network connected?
YES NO*
SSID
[WPS]Home Network
Guest
[Rescan]
[Manual con g]
SSID
Push button
Pin
Skip WPS
>
>
>
15