Sound Menu - Yamaha YSP-1000 Owner's Manual

MANUAL SETUP
■ IMAGE LOCATION (Image location)
Use to adjust the direction from which the front left and
right speaker sound is heard by directing these audio
signals so that they are also output from the center
speaker.
Use this feature to redirect audio signals if the sound
coming from the left and right speakers seems unnatural,
such as when your listening position is not the center of
your listening room.
You can only adjust this parameter when 3 beam mode or
5 beam mode is selected as the beam mode (see page 44).
Choices: ON, OFF
Setting range: 0% to 95%
Initial setting: 0%
C)IMAGE LOCATION
. OFF
L
LEFT;;;;;;;;;;0%
RIGHT;;;;;;;;;0%
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
LEFT (Left)
Adjusts audio signals towards the left.
The higher the percentage, the louder the output from the
center.
Without adjustment
RIGHT (Right)
Adjusts audio signals towards the right.
The higher the percentage, the louder the output from the
center.
Without adjustment
74
) ON
C
R
p p
With the front left
speaker adjusted
With the front right
speaker adjusted

SOUND MENU

Use to manually adjust various parameters related to the
sound output.
SET MENU → MANUAL SETUP → SOUND MENU
1 SOUND MENU
. A)TONE CONTROL
B)BEAM LEVEL
C)SUBWOOFER SET
D)MUTE LEVEL
E)AUDIO DELAY
F)ROOM EQ
G)DD/DTS Dynamic Range
[ ]/[ ]:Up/Down
[ENTER]:Enter
■ TONE CONTROL (Tone control)
You can adjust the tonal quality of your speakers.
A)TONE CONTROL
.
TREBLE;;;;0dB
BASS;;;;;;0dB
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
TREBLE (Treble)
Use to adjust the high frequency response.
Choices: –12 dB to +12 dB
Initial setting: 0 dB
BASS (Bass)
Use to adjust the low frequency response.
Choices: –12 dB to +12 dB
Initial setting: 0 dB
- +
p p