Protecting The Current Settings - Yamaha YSP-1000 Owner's Manual

5
Press / to adjust the maximum volume
level.
ENTER
Control range: 0 dB to –99.0 dB
Control step: 1 dB
6
Press STANDBY/ON on the front panel or on
the remote control to set this unit to the
standby mode.
STANDBY/ON
Front panel
The new setting for the maximum volume level will
be activated when you turn on the power of this unit
next time.
or
Remote control
ADJUSTING SYSTEM PARAMETERS

Protecting the current settings

You can protect the settings currently saved in the system
memory from being accidentally erased or unwantedly
changed.
1
Repeat steps 1 to 3 in "Setting the maximum
volume level" on page 80.
2
Press / on the remote control so that
MEMORY PROTECT is shown in the front
panel display.
ENTER
MEMORY PROTECT
3
Press ENTER.
ENTER
VOL
81