Connecting A Tv - Yamaha YSP-1000 Owner's Manual

CONNECTIONS

Connecting a TV

Connect a TV to this unit and display the OSD for easy viewing when you adjust the system parameters in SET MENU.
■ Audio connections
Connect the analog audio output jacks of your TV to the
TV/STB AUDIO IN jacks of this unit. If your TV has an
optical digital output jack, connect the optical digital
output jack of your TV to the TV/STB OPTICAL
DIGITAL IN jack of this unit in addition to the analog
audio connection. Once the digital audio connection is
made, digital audio signals can be input to this unit during
digital broadcasting.
y
• The circuits of composite and component video signals are independent of each other.
• To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 23).
Note
If you connect this unit to the analog audio and optical digital audio output jacks at the same time as shown in the left illustration below,
the digital audio signals output at the optical digital output jack take priority over the analog audio signals output at the analog audio
output jacks.
TV
Rear panel of this unit
REMOTE IN
RS-232C
Cables used for audio connections
Audio pin cable (supplied)
(White)
(Red)
Optical cable (supplied)
16
Optical digital
output
DVD AUX TV/STB
COAXIAL
OPTICAL TV/STB
DIGITAL IN AUDIO IN
(White)
(Red)
■ Video connections
Connect the video input jacks of your TV to the VIDEO
OUT jack of this unit. If your TV has component video
input jacks, connect the component video input jacks of
your TV to the COMPONENT VIDEO OUT jacks of this
unit in addition to the composite video connection. Once
the component video connection is made, you can enjoy
images with better resolution.
Analog audio
output
R L
COMPONENT
VCR
VCR DVD/AUX
SUBWOOFER
Cables used for video connections
Video pin cable (supplied)
(Yellow)
Component video pin cable
(Green)
(Blue)
(Red)
Video Component
input video input
COMPONENT COMPONENT
STB
VIDEO IN VIDEO OUT
(Yellow)
(Green)
(Blue)
(Red)