Selecting The Input Mode - Yamaha YSP-1000 Owner's Manual

SELECTING THE INPUT MODE

You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source.
y
We recommend setting the input mode to AUTO in most cases.
STANDBY/ON
DVD
INPUT1
AUX
YSP
1
Press one of the input selector buttons on
the remote control to select the desired input
source.
DVD VCR
AUX
2
Press INPUTMODE on the remote control
repeatedly to toggle between input modes.
INPUTMODE
TV AUTO
TV DTS
TV ANALOG
When TV or STB When DVD is
is selected as selected as the
the input source input source
Notes
• The input mode of VCR is fixed to ANALOG. However, if the
TV OPTICAL IN jack of this unit is assigned to VCR, AUTO,
DTS and ANALOG become available as the input mode of
VCR (see page 77).
• ANALOG is not available as the input mode of DVD and AUX.
86
SELECTING THE INPUT MODE
POWER
POWER
AV TV
VCR STB TV
TV
INPUT2 MACRO
( ) INPUTMODE SLEEP
STB TV
DVD AUTO AUX AUTO
DVD DTS AUX DTS
When AUX is
selected as the
input source
• AUTO
Automatically selects audio input signals in the following
priority order:
1) Dolby Digital or DTS
2) PCM
3) Analog
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
Notes
• When the input mode is set to AUTO, this unit automatically
plays back multi-channel sources n the selected input mode.
• ANALOG cannot be selected as an input mode if analog signals
are not being input from the selected input source.
y
You can adjust the default input mode to be selected when the
power of this unit is turned on (see page 77).