Getting Started - Ryobi RED1220 Original Instructions Manual

GETTING STARTED

1
Always wear safety goggles or safety glasses with side shields
when operating the product. Wear non-slip, heavy-duty protective
gloves. Wear non-skid, protective footwear that will protect your
feet and improve your footing on slippery surfaces.
5
Before using the product, make sure the cable is positioned
correctly to avoid damage. Hang the cable onto the cable retainer.
8
2
2
1
Install the lower shaft to the upper shaft..
6
1
Form a loop and secure the cable in the cable retainer.
NOTE: Prevent the unintentional starting. Always check that the
switch is in off position before plugging in the product to the power
supply.
3
2