Starting The Application - abc -MEMS User Manual

Figure 13 WiFi Tab
1. Connection Test Button
2. Disable All WiFi Button
3. Email Setup Button
4. WiFi Setup Button
5. Name (SSID) of WiFi Access Point or Router
6. IP Address of Instrument
7. Instrument WiFi Active Indicator
8. Link Indicator
9. Router or Access Point Connected Indicator
10. Network Connected Indicator
11. Server Connection Indicator
12. Server IP Address
13. Email Connection Indicator
8.1

Starting the Application

Note: The application can be run with or without an instrument connected. When an instrument is not
connected the application can only be used to display and analyze a previously saved log file. All the
controls and indicators related to the instrument are grayed out.
To control a ABC Mems using the Instrument_Manager, proceed as follows:
1. Connect the instrument to an available USB connector on the PC.
User's Manual
22