System Parameters; Default Parameters; Parameters Export - dallmeier SMatrix DMX2400 Service

6

System Parameters

The configuration of the device is stored in parameter files. They can be reset to default
settings as well as exported and imported.
6.1

Default Parameters

The original configuration of the device can be restored by resetting to default system pa-
rameters.
 Open the System Parameters dialogue via System > System Parameter > Default.
Fig. 6-1
 Select the relevant track mode.
 Confirm with OK.
6.2

Parameters Export

The system parameters can be stored and adopted to special requirements after an export.
 Open the Save Configuration dialogue via System > System Parameters > Save
Configuration.
www.dallmeier.com
NOTICE
All recordings and recording settings will be lost when the recorder is reset
to default system parameters.
DMX 2400
14