Move [Moveto ?] - Yamaha SU10 Owner's Manual

3.
Press [ENTER] to execute the copy. If the copy is allowed, the SU10 begins
execution and displays the Keep PwrOn message.
Do not switch off power while this message is on the screen.
If your destination pad is in a locked bank, the LCD briefly displays the Locked Bank!
message, then waits for you to select another destination.
If the destination pad is already occupied, the LCD briefly displays the Cannot Copy! mes-
sage, then waits for another selection.
4.
When execution is completed, the LCD briefly displays the Complete mes-
sage, then asks whether to begin editing of the destination pad. You can now
( a ) press [ENTER] to start editing of the destination pad; ( b ) select a different pad
for editing; or ( c ) press [EXIT] to return to PLAY mode.
MOVE [MoveTo
Purpose
Use this function to move a sample (wave content and all parameter settings other
than MIDI Note Number) from one pad to another. The destination pad must be
empty. Following the operation, the source pad will be empty, and the destination
pad will hold the sample.
Source
Destination
Procedure
1.
When you enter this function, the LCD displays a message such as the follow-
ing:
MoveTo
x x ?
Change the destination selection as necessary. To change the bank, press [BANK].
To change to a different sample in the same bank, press the corresponding
pad, or else press [+1] or [–1].
? ]
Pad
Sample
Execute
Move
Pad
Pad
Pad
Sample
Editing
49