Yamaha SU10 Owner's Manual page 19

1 Current sampling grade
2 Current operating mode
PLAY = Sample/song playback
EDIT = Sample edit
UTIL = Utility setup
3 Loop mode of currently selected pad
4 Indicates whether the selected sample is STEREO or MONO.
5 Currently selected input source
6 Ribbon value (during playback or editing), or input level (during recording
setup)
7 Currently selected bank of pads
8 Selected effect or special play function (if any)
PCH: Ribbon-controlled pitch
EFCT: Scale, Filter, Crossfade, External Filter
SCH: Scratch, External Scratch
9 Currently selected song, and song REPEAT arrow.
Arrow appears only if song is playing in REPEAT mode.
0 Message/parameter display area.
During editing, the upper line displays the parameter name and the bottom
line displays the value. At other times, this area displays input prompts, status
information, and error messages.
A Indicators
MIDI:
TIME:
TEMPO: ON during loop editing.
REC:
B Meter display
During sample record: Recordable time (to nearest 0.1 sec.)
During song play:
During song creation: Remaining song memory (16-bit words)
During loop edit:
12
Controls, Connectors, and LCD
ON when MIDI message is coming in.
ON during recording.
ON when SU10 is recording (or standing by to record) a sample
or song.
Song location (to nearest 0.1 sec.)
Loop tempo (estimated beats per minute)