Switching the appliance on
NOTE
After the "On / Off
" sensor has been actuated to switch on your appliance, a
heat setting must be selected within approximately 10 seconds. Otherwise, the
appliance will switch itself off for safety reasons.
Temperature control
CTR464NB01P_FA_DG68-00963A-00_EN.indd 13
1.
Touch the "Lock
" sensor for
approximately 3 seconds.
2.
The appliance is switched on using the
"On / Off
" control sensor. Touch the
"On / Off
" sensor.
•
The digital displays will show
For setting and adjusting the power
level (
to
) for cooking, touch the
corresponding cooking zone's
,
keys.
The first time
is pressed, the heat level is
set to
.
The first time
is pressed, the heat level is
set to
.
Use the
key to increase the heat setting
and the
key to decrease.
Switching the appliance off
NOTE
•
After switching off a single cooking zone or the entire cooking surface, the
presence of residual heat will be indicated in the digital displays of the
.
corresponding cooking zones in the form of an
•
If the heat setting is at and
can be touched one additional time, and the heat setting will go to zero.
•
For faster adjustment, keep your finger on the
required value is obtained.
•
If more than one sensor is pressed for longer than 10 seconds,
in the heat setting display. To reset, touch the "On / Off
Switching a cooking zone off
To completely switch off the appliance, use
the "On / Off
" control sensor.
Touch the "On / Off
" sensor.
(for "hot").
you want to turn the
burner off, the sensor
or
sensor until the
will show
" sensor.
To switch off a cooking zone, return the
setting to
by using the control panel's
heat setting and touch sensors
or
English 13
.
2017-04-16
7:42:27