Advertisement
ET8122P Series
Unmanaged Industrial 8-port 10/100Base-TX + 2-Port 10/100/1000T/FX SFP Combo Ethernet
Switch with PoE/PSE
Wall Mount Plate Mounting
Follow the steps below to mount the industrial switch with wall mount plate.
1. Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.
2. Place the wall mount plate on the rear panel of the industrial switch.
3. Use the screws to screw the wall mount plate on the industrial switch.
4. Use the hook holes at the corners of the wall mount plate to hang the industrial switch on the wall.
5. To remove the wall mount plate, reverse steps above.
5
Advertisement
