Advertisement
ET4222H-S-DR
Hardened IP CCTV Self-Configured 4-port 10/100/1000Base-T + 2-port 1000Base-X SFP Ethernet Switch
DIN Rail Installation
ET4222H-S-DR can be installed on a DIN rail. Installation steps are as follows:
Top
Hook
1. Put the switch close to the
DIN rail track. Lock the upper
part of the DIN rail clip on the
upper side of the track.
Removal:
1. Pull down the metal part, pull out the lower part of the DIN rail clip until it leaves the track.
2. Lift up the upper part of the clip until the switch separate from the track.
Wall-Mount Installation
1. Remove the screws to
take out the DIN rail clip
from the switch.
Locking
Slide
2. Press the switch until
the metal part move
downward and a "click"
sound is heard.
2. Tighten the screws to fix the
wall mount plate and the switch
together.
3
3. The metal part is then moved back
to its original position. The switch is
securely locked on the track. The
installation is completed.
3. Mount the switch on the wall
or on a flat surface with 2 screws
piercing through the mounting
holes to secure it in position.
Mounting
Holes
V1.0
Advertisement
