Din-Rail Mounting - OTS ET8122P Series Quick Start Manual

Unmanaged industrial 8-port 10/100base-tx + 2-port 10/100/1000t/fx sfp combo ethernet switch with poe/pse

ET8122P Series

Unmanaged Industrial 8-port 10/100Base-TX + 2-Port 10/100/1000T/FX SFP Combo Ethernet

Switch with PoE/PSE

DIN-Rail Mounting

The DIN-Rail is screwed on the industrial switch when out of factory. If the DIN-Rail is not screwed on the industrial switch, please see the

following pictures to screw the DIN-Rail on the switch. Follow the steps below to hang the industrial switch.

1. First, insert the top of DIN-Rail into the track.

2. Then, lightly push the DIN-Rail into the track.

3. Check if the DIN-Rail is tightened on the track or not.

4. To remove the industrial switch from the track, reverse steps above.

Table of Contents