Adjusting The Microphone And Harmony Sound - Yamaha Portatone PSR-1500 Owner's Manual

VIBRATO RATE
VIBRATO DELAY
HARMONY1/2/3 VOLUME Sets the volume of the first (lowest), second, and third (highest)
HARMONY1/2/3 PAN
HARMONY1/2/3 DETUNE
PITCH TO NOTE
PITCH TO NOTE PART
Adjusting the Microphone and Har-
mony Sound
1
Press the [MIC SETTING/VOCAL HARMONY] button.
1
2
Press the [I] (MIC SETTING) button to call up the MICROPHONE SET-
TING display.
Sets the speed of the vibrato effect. Also affects the lead vocal
sound when the LEAD GENDER TYPE above is set to other than
Off.
Specifies the length of the delay before the vibrato effect begins
when a note is produced. Higher values result in a longer delay.
harmony notes.
Specifies the stereo (pan) position of the first (lowest), second,
and third (highest) harmony notes.
Random
The stereo position of the sound will change randomly when-
ever the keyboard is played. This is effective when the Har-
mony mode (page 186) is set to "VOCODER" or "CHORDAL."
L63>R – c – L>R63
A setting of L63>R pans the sound hard left, while 0 is at cen-
ter, and L<R63 is at hard right.
Detunes the first (lowest), second, and third (highest) harmony
notes by the specified number of cents.
When this is set to "ON," you can "play" the voices of the PSR-
3000/1500 with your voice. (The PSR-3000/1500 tracks the pitch
of your voice and converts it to note data for the tone generator.
Keep in mind, however, that dynamic changes in your voice do
not affect the volume of the tone generator.)
Determines which of the PSR-3000/1500 parts will be controlled
by the lead vocal when the Pitch to Note parameter is "ON."

Adjusting the Microphone and Harmony Sound

2
PSR-3000/1500 Owner's Manual 183