Advertisement
Quick Links
Advertisement
Related Manuals for Diamond G65/GGF4T
Summary of Contents for Diamond G65/GGF4T
- Page 1 G65/GGF4T—G65/GGF7T INDEX...
- Page 2 Warnings Compliance with “EEC” Directives for gas appliances Installation diagrams Technical data table – gas brazier Gas characteristics Instructions for the qualified installer Appliance installation Laws, technical regulations and general rules Discharge of fumes for type ”A” appliances Checking for gas leaks Maintenance Converstion for use with a different type of gas Changing spare parts...
- Page 3 THIS APPLIANCE HAS BEEN MADE FOR COOKING FOOD AND MUST ONLY BE USED BY PROFESSIONALLY SKILLED PERSONNEL IN THE WAY DESCRIBED IN THIS INSTRUCTION MANUAL. WARNINGS ♦ Read this handbook through carefully as it provides important information for a safe installation, use and maintenance.
- Page 4 BURNERS MILLIMETRE MODEL X POWER NATURAL NATURAL No. x kW G30 – G31 G30 – G31 kg/h 30mbar 37mbar m³/h 20 mbar G65/GGF4T 1 x 7.5 0.583 0.794 135L 205L G65/GGF7T 2 x 7.5 1.166 1.588 135L 205L BY-PASS ADJUSTABLE...
-
Page 5: Checking For Gas Leaks
INSTRUCTIONS FOR THE QUALIFIED INSTALLER APPLIANCE INSTALLATION • Remove the appliance from its packaging and position it (always) under a suction hood. • Always use rigid galvanised steel or copper pipes for connecting the appliance. • If the appliance is wall mounted, in contact with flammable material, place a layer of heat- resistant insulating material between the appliance and the wall or leave a space of 200 mm between the appliance and the wall. -
Page 6: Maintenance
MAINTENANCE There is very little maintenance thanks to the correct way the appliances have been made. However, we do advise having the systems checked by qualified personnel at least twice a year. N.B.: the manufacturer declines all responsibility for direct or indirect damages caused by incorrect installation, bad maintenance, tampering, improper uses and the failure to comply with the accident prevention norms regarding the prevention of fire and safety for gas systems. - Page 7 CHANGING SPARE PARTS Safety cock (6): remove the panel (12), unscrew the nut connecting the cock to the supply shaft (9) and to the burner supply pipe, unscrew the thermocouple (15) and the pilot pipe (16) from the cock, change the cock. Thermocouple (15): remove the panel (12), unscrew the thermocouple (15) from the cock (6) and from the pilot support (18) and then change it.
- Page 8 USER INSTRUCTIONS Before using the appliance for the first time, make sure that the fat collection tray is filled with water. The water level must never fall below the reference notch placed on the side of the basin. Check the water level after every 2 hours of continuous working in order to always keep the water level over the reference notch.
-
Page 9: Maintenance, Cleaning And Care
MAINTENANCE, CLEANING AND CARE Always disconnect the appliance from the gas supply before embarking on any maintenance work. MAINTENANCE • There is very little maintenance to do thanks to the correct way the appliances have been made. However, we do advise having the systems checked by qualified personnel at least twice a year. - Page 10 10.1 EXPLODED FUNCTIONAL PARTS TABLES MOD. 65/40 GRG LIVELLO MINIMO ACQUA 65/70 GRG NIVEAU MINIMUM DE L'EAU MINIMUM WASSERSTAND MINIMUM WATER LEVEL FIG. 2 FIG. 5 19 16 11 26 FIG. 3 CHIUSO PILOTA FERME' VEILLEUSE MAXIMUM MINIMUM FIG. 4 GESCHLOSSEN ZÜNDFLAMME CLOSED...