Advertisement
LOG SET INSTALLATION PREPARATION
LOG PLACEMENT
The positioning of logs is critical to safe and clean operation of this fireplace. Sooting and other
problems may result if the logs are not properly and firmly positioned in the fireplace.
BEFORE BEGINNING THE INSTALLATION:
1. Remove the Invisimesh barrier and glass door on fireplace using instructions from the fireplace manual.
2. Install liner kit before the logset. See the liner instructions manual for further information.
3. Place logs in position as shown in Figure 1 and the following pages.
DO NOT force holes into the logs. Install using the holes and pins located in each log.
Figure 1: Log placement
Installation instructions - Log Set
Page 3
Advertisement
