Using The Metronome - Yamaha P-140 Owner's Manual

Using the Metronome

The P-140 features a built-in metronome for convenience in practicing and use with the Recording
features.
1.
Press the [METRONOME] button to start the metro-
nome.
The metronome sound is turned on.
Adjusting the tempo
The tempo of the metronome and user song recorder playback (the recorder is
described in the next section) can be set from 32 to 280 beats per minute by
using the
[TEMPO/FUNCTION –, +]
button's
+] [TEMPO]
Adjusting the time signature
The time signature (beat) of the metronome can be set by using the
[+/YES] buttons while holding the
from 0 to 15. The current setting appears on the display while you are holding
the button.
[METRONOME]
Holding the
[METRONOME]
button.
2.
Press the [METRONOME] button to stop the metro-
nome.
1 2
[TEMPO/FUNCTION –, +] buttons
The beat indicator flashes
at the current tempo.
buttons (when the
indicator is lit).
[METRONOME]
[–/NO] [+/YES] buttons
[TEMPO/FUNCTION –,
and
[–/NO]
button. You can set the beat
Beat
Selecting & Playing Voices
NOTE
If the [TEMPO/FUNCTION] but-
ton's [FUNCTION] indicator is lit,
press the [TEMPO/FUNCTION]
button to light the [TEMPO] indi-
cator.
NOTE
The volume of the metronome can
be adjusted via the Metronome
Volume function in Function
(pages 37, 44).
P-140 Owner's Manual
27