Touch Sensitivity - [Touch] - Yamaha P-140 Owner's Manual

Touch Sensitivity – [TOUCH]
[TOUCH]
You can select four different types of keyboard touch sensitivity — HARD, MEDIUM,
SOFT or FIXED — to match different playing styles and preferences.
HARD: Requires that the keys be played quite hard to produce maximum loud-
ness.
MEDIUM: Produces a fairly "standard" keyboard response.
SOFT: Allows maximum loudness to be produced with relatively light key pres-
sure.
FIXED: All notes are produced at the same volume no matter how hard the key-
board is played. (No indicators are lit.) The fixed volume can be changed.
To select a touch sensitivity type press the
few times until the indicator corresponding to the desired type
lights (the indicators light in sequence each time the
button is pressed). No indicator is lit when "FIXED" is
selected.
Changing the volume when FIXED is selected
When you select FIXED, you can set the volume for notes
played in FIXED by using the
while you hold the
[TOUCH]
level appears on the display. The volume range is from 1
(minimum volume) through 127 (maximum volume). The
default setting is 64.
button a
[TOUCH]
[TOUCH]
and buttons
[–/NO] [+/YES]
button. The current volume
[–/NO] [+/YES] buttons
Volume range
Selecting & Playing Voices
[TOUCH] button
NOTE
This setting does not change the
weight of the keyboard.
NOTE
Default setting = MEDIUM
NOTE
The touch sensitivity type will
become the common setting for
all voices. However, the touch
sensitivity settings may have little
or no effect with certain voices
that are not normally responsive
to keyboard dynamics. (Refer to
the "Preset Voice List" on
page 53.)
NOTE
The touch volume set in FIXED
will become the common setting
for all voices.
NOTE
Releasing the [TOUCH] button
changes the touch type.
If you are changing the volume by
holding the [TOUCH] button,
releasing the [TOUCH] button will
not change the touch sensitivity
type. (FIXED will remain
selected.)
P-140 Owner's Manual
25