F9. Backup Functions - Yamaha P-140 Owner's Manual

Detailed Settings – [FUNCTION]

F9. Backup Functions

You can back up some settings, such as voice
selection and reverb type, so that they will not
be lost when you turn off the power to the P-
140. If the backup function is turned on, the
settings at power off are effective. If the
backup function is turned off, the settings in
memory are erased when you turn off the
power. In this case, when you turn on the
power to the unit, the default settings (the ini-
tial settings) will be used. (The factory setting
default list is found on page 59.)
However, the backup settings themselves, the
contents of the user song recorder memory,
and character code setting are always backed
up. Refer to "Data Backup Using a Computer"
on page 50.
You can turn the backup function on or off for
each function group. Different Backup Groups
are provided for the different function catego-
ries of the instrument: Voice, MIDI, Tuning and
Others.
F9.1: Voice
Setting range:
Default setting: OFF
• Voice (Keyboard, Dual, and Split)
• Dual (ON/OFF, Voice, and Dual Functions for each
voice combination)
• Split (ON/OFF, Voice, and Split Functions for each
voice combination)
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome Beat, Volume (
• Song Part Cancel Volume (
F9.2: MIDI
Setting range:
Default setting: ON
The MIDI functions (
(expect for
46
P-140 Owner's Manual
ON/OFF
settings)
settings)
ON/OFF
settings)
)
F9.3: Tuning
Setting range: ON/OFF
Default setting: ON
• Transpose
• Tuning ( settings)
• Scale (including base note) (
F9.4: Others
Setting range:
ON/OFF
Default setting: ON
• Other functions ( settings)
• VARIATION setting
Factory Preset Recall
All settings affected by the Functions (F1 – F9) can be
restored to their original factory preset values by
turning the
[STANDBY/ON]
ing the C7 key (right-most-key on the keyboard).
This operation also erases all user song data. The fac-
tory preset values are listed on page 59.
CAUTION
After turning the [STANDBY/ON] switch ON while
holding the C7 key (right-most-key on the key-
board), "CLr" appears in the display. Never attempt
to turn off the power while "CLr" appears in the dis-
play. Turning the power off in this state may cause
the system to freeze.
settings)
switch ON while hold-