Using The Pedals; Using Headphones; Music Rest - Yamaha P-140 Owner's Manual

Using the Pedals

Sustain Pedal (Sustain Pedal jack)
This jack is for connecting the included pedal (FC3).
The pedal functions in the same way as a damper pedal on an acoustic piano. Connect the included pedal (FC3) to this
jack and press the pedal to sustain the sound. The further down the pedal is pressed, the longer the sound will be sus-
tained (can be used like a half pedal effect).
When the GRAND PIANO 1 and 3 voices are selected, pressing the FC3 pedal activates the instrument's special Sustain
Samples to accurately recreate the unique resonance of an acoustic grand piano's soundboard and strings.
An optional FC4/FC5 foot switch can also be connected to this jack. However, these foot switches cannot be used to con-
trol the half pedal effect.
The depth of the effect produced by the Sustain Samples can be adjusted via the Pedal Functions (pages 37, 43) in
NOTE
Function.
AUX Pedal (AUX Pedal jack)
This jack is for connecting an optional FC4/FC5 foot switch or an optional FC7 foot controller. A wide range of functions,
including the Soft Pedal function can be assigned to this jack. For instructions on assigning the pedal, refer to pages 37,
43.
The FC7 Foot Controller can be used to control Expression (pages 37, 43).
NOTE

Using Headphones

Connect a set of headphones to one of the
Two jacks are provided.
[PHONES]
You can connect two sets of standard stereo headphones. (If you are
using only one set of headphones, you can plug them into either
jack.)
CAUTION
Do not use the P-140 at a high volume level for a long period of time,
or your hearing may be damaged.

Music Rest

The P-140 includes a music rest that can be attached to the instrument by inserting it into the holes at the top of the con-
trol panel.
FC3
[PHONES] jacks.
Before Using the P-140
On front panel
Standard
stereo mini
plug
P-140 Owner's Manual
13