Editing An Awm Voice - Yamaha Motif DDK-7 Owner's Manual

8
140 DDK-7 Owner's Manual

Editing an AWM Voice

You can edit an AWM Voice on the AWM Page and LAYER Page in the Voice Edit
display. In the AWM Page, the tonal balance of the entire Voice can be corrected by
some EQ parameters. In the LAYER Page, you can make detailed edits to each
Element.
AWM Page
1
2
1
Element On/Off switches
The [AWM1] – [AWM4] buttons indicate the Elements which make up the selected
Voice. You can mute any of the Elements by simply pressing the corresponding button.
Pressing the button again cancels the mute.
2
EQ LOW FREQ./EQ LOW GAIN
Sets the frequency and gain (level) of the low frequency band. The EQ LOW FREQ.
slider sets the desired frequency band over a range of 32 Hz – 2.0 kHz. The EQ LOW
GAIN slider sets the level for the frequency band (specified by the EQ LOW FREQ.
slider) over a range of -12 dB – +12 dB.
3
EQ HIGH FREQ./EQ HIGH GAIN
Sets the frequency and gain (level) of the high frequency band. The EQ HIGH FREQ.
slider sets the desired frequency band over a range of 500 Hz – 16.0 kHz. The EQ
HIGH GAIN slider sets the level for the frequency band (specified by the EQ HIGH
FREQ. slider) over a range of -12 dB – +12 dB.
EQ (Equalizer)
Usually an equalizer is used to correct the sound output from amps or speakers to
match the special character of the room. The sound is divided into several frequency
bands, then by raising or lowering the level for each band, the correction is made.
This DDK-7 has a two-band (high and low) digital equalizer that lets you adjust the
overall sound according to the type of music you play — classical music being more
refined and soft, pop music more crisp, and rock music more dynamic.
3