Recording; Recording Your Performance - Yamaha Motif DDK-7 Owner's Manual

Never attempt to eject the
media or turn the power off
during recording, reading
and playing back.
NOTE
7
You cannot record to a folder
which contains songs for the
EL-series Electone, such as
EL-900.
Do not remove the media
from the instrument while
data is being recorded
(while the hourglass icon
or other message is
shown).
110 DDK-7 Owner's Manual
4

Recording

Recording your performance

Set the desired Registrations on the DDK-7. Make all the DDK-7 settings necessary
for the song you will record. This means entering the all Registrations you will need for
the entire performance in the Registration Memory. Make sure also to select the
Registration that you will use at the beginning of the song.
1
Insert a USB flash memory to the USB TO DEVICE terminal.
Select a blank song for recording your performance.
2
For details on selecting a song, see page 104.
If you want to overwrite an existing song already containing performance data,
you will need to delete it beforehand.
Press the [RECORD] button in the display.
3
The following display appears, indicating that you can record your performance.
Press the [F] (Play) button.
4
An hourglass icon appears, indicating that Registration data is currently being
read.
5
After the hourglass disappears, begin playing.
When you finish playing, press the [ J ] (Stop) button in the
6
display.
The recording is finished and the LCD returns to the SONG SELECT Page.
The song to which your performance is recorded is automatically named
"SONG XX" (xx indicates song number). You can change the song name as
desired. (For details, see page 113.)