Yamaha Motif DDK-7 Owner's Manual page 54

Parameter
Sensitivity
Threshold
Dry/Wet
PHASER
4
Similar to Flanger, this produces rolling timbre
changes and a pronounced up/down filter sweep
effect.
Effect Type
PHASER 1
PHASER 2
EP PHASER 1
EP PHASER 2
EP PHASER 3
TEMPO PHASER
DYNA PHASER
Parameter
LFO Freq.
LFO Depth
Phase Shift
Feedback
Level
Sensitivity
Threshold
Dry/Wet
54 DDK-7 Owner's Manual
Value Description
0 - 127 Determines the sensitivity.
The higher the value the
greater the change.
0 - 127 Determines the input level at
which effect begins to be
applied.
D63>W - D<W63 Determines the original
sound and the effect sound.
Value Description
0.00 - 39.7 Hz Determines the frequency of
oscillation, or the speed of
the wavering effect.
0 - 127 Determines the depth of
oscillation, or the amount of
the wavering effect.
0 - 127 Determines the phase
relationship between the
processed signal and the
original. This changes the
sound characteristics of the
Phaser effect.
-63 - +63 Determines the amount of
output sound (with the
phasing effect) that is
returned to the input. The
larger the value, the more
complex and pronounced the
phasing effect becomes.
0 - 127 Determines the sensitivity.
The higher the value the
greater the change.
0 - 127 Determines the input level at
which effect begins to be
applied.
D63>W - D<W63 Determines the balance of
the original sound and the
effect sound.
TREMOLO/AUTO PAN
This periodically changes the volume and has the
effect of moving the sound image both front and
back, and left and right.
Effect Type Effect Type
TREMOLO 1 ORGAN TREMOLO
TREMOLO 2 AUTO PAN
XG TREMOLO XG AT PAN 1
EP TREMOLO XG AT PAN 2
GT TREMOLO 1 EP AUTO PAN
GT TREMOLO 2
Parameter Value
LFO Freq. 0.00 - 39.7 Hz
LFO Depth 0 - 127
AM Depth 0 - 127
PM Depth 0 - 127
Input Mode Mono, Stereo
L/R Depth 0 - 127
F/R Depth 0 - 127
Pan L<->R, L->R, L<-R,
Lturn, Rturn, L/R
Dry/Wet D63>W - D<W63
Description
Determines the tremolo
speed.
Determines the depth of the
Tremolo effect.
Determines the amount of
volume change.
Determines the amount of
pitch change in the sound.
Determines the input
configuration.
Determines the depth of
panning between the left and
right channels.
Front/rear. Determines the
depth of the front and rear
panning effect. This controls
both level and pitch at the
same time.
Determines the Auto Pan
type. ("L<->R" is a sine wave
and "L/R" is a sawtooth
wave.)
Determines the balance of
original sound and the effect
sound.