Yamaha Motif DDK-7 Owner's Manual page 31

4
Press the [SOLO] button in the display.
Select the [SOLO] button in the left side of the display if you are using the
(1 VOLUME) of the FOOT PEDAL jacks, or select in the right side if you
are using (2 SUSTAIN).
The Solo function is assigned to the Foot Pedal, and the polarity is
selected automatically.
In this condition (Solo on), all Voices set to the Upper Keyboard except
for Lead Voice 2 are playable on the Upper Keyboard.
5 To temporarily turn Solo on as you play, press the Foot
Pedal and hold down.
In this condition, only the Lead Voice 2 is playable on the Upper Keyboard.
(All other voices are muted.) Each time you press the Foot Pedal (Solo on)
you can play only Lead Voice 2, and each time you release it (Solo off ) you
can play all Voices except Lead Voice 2 on the Upper Keyboard.
Notes on using Solo
• Some Registration Menu settings reverse the polarity of the Foot Pedal for the
Solo function. In this condition, the situation described above is reversed. In
other words, each time you press the Foot Pedal you can play all Voices except
Lead Voice 2, and each time you release it you can play only Lead Voice 2 on the
Upper Keyboard. To return the polarity to its original setting, press the [-]
button in the display.
• Pressing the Foot Pedal while holding down a key will not turn Solo on for
that key. Solo will active when the next key is played after pressing the Foot
Pedal.
• Lead Voices 1 and 2 sound only the highest note if two or more keys are
played. However, in the Solo mode, Lead Voice 2 sounds for the last key
played.
DDK-7 Owner's Manual 31
2