Advertisement
Quick Links
Boston Three Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
Locking Nut
Bolt
Screw
x9
x9
x4
F
G
H
Nut
Screw
Handle
Left Slide Rail
x24
x12
x6
L
M
Right Slide Rail
Right Slide Rail
Allen Key
x3
x3
Hardware Supplied
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
D
E
Dowel
Screw
x18
x30
J
K
Left Slide Rail
x3
x3
O
N
U
Screw
Foot Pads
x1
x36
x6
WARNING:
P
Q
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
Screw
Screw
x1
x1
materials may require different fixing devices from those supplied.
R
S
Washer
Wall Plug
x2
x1
T
Safety Strap
x1
Wall Strap
Any furniture that is not anchored to a wall has the potential to tip
1
Advertisement
Related Manuals for Mocka Boston Three Drawer
Summary of Contents for Mocka Boston Three Drawer
- Page 1 Boston Three Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
- Page 2 Attach 1 x right slide rail (M) to panel [12] and secure with 3 x screws [2] and secure with 9 x scews (N). Tighten with a screwdriver. Attach 3 (N). Tighten with a screwdriver. x foot pads (U) to panel [2]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Insert 9 x bolts (B) into panels [1], [2] and [3]. Tighten with a screwdriver. Insert 2 x dowels (D) into panel [3]. Connect panels [3] and [4] and secure with 3 x locking nuts (A). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 [4] and [5] and secure with 3x locking nuts (A). Tighten with a back of the unit as shown. screwdriver. Secure panels [4] and [5] to panel [1] with 2x screws (C). Tighten with an allen key (O). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 5 [4] and [5] and secure with 3x locking nuts (A). Tighten with a Tighten with an allen key (O). screwdriver. Secure panels [4] and [5] to panel [2] with 2x screws (C). Tighten with an allen key (O). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 6 Slide panel [11] between the grooves on panels [9] and [12] to form the and 4x nuts (F). Tighten with an allen key (O). base of the drawer as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 7 Connect 2 x handles (H) to panel [8] and secure with 4 x screws (G). Connect panel [8] to panels [9] and [12] and secure with 4x screws (E) Tighten with a screwdriver. and 4x nuts (F). Tighten with an allen key (O). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 8 1x wall plug (S), 2x washers (R), 1x screw (P) and 1x screw (Q). Ensure smoothly and easily along the rails. Once assembled, lift furniture the unit is balanced and steady before use. You’re done, enjoy! into place, do not drag. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Boston Three Drawer and is the answer not in the manual?
Questions and answers