Table of Contents
Advertisement
Step 2.
1. Connect the Front Standing Tube (7) and the Main Frame (5) with M8 x 50mm Hex Bolt (31), 2pcs
M8 Washer (38) and M8 Locknut (41).
2. Attach the Main Frame (5) to the Crossbar (1) with M8 x 55mm Hex Bold (30), 38mm Plate
(6), M8 Washer (38) and M8 Locknut (41).
3. Attach the Support Part (8) to the Main Frame (5) with M8 x 50mm Carriage Bolt (36), 1pc M8
washer (38) and M8 Locknut (41) as shown. Then connect the Support Part (8) to the Front Standing
Tube (7) with M8 x 10mm Bolt (35) and 1pc M8 washer (38).
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
Dyaco Canada Inc. 2019
Page 8
Advertisement
Table of Contents
