Sending A Status Message To A Group; Targeted Status - Motorola TETRA MTP850 Feature User Manual

predefined template list or to the message editor screen.
It is recommended to wait for the message acknowledge before
sending a new message.

Sending a Status Message to a Group

1. Switch to the desired talkgroup, to which you want to send
a status message.
2. From the main menu, select Messages >
3. In this example,
If you wish to send a different status, scroll
to your selection in the list of pre-
programmed statuses, or key the status
number. To stop scrolling, press Back. The
display returns to the select status list.
4. Press
MENU
return to the status list.
5. Press Select, then press PTT or
touch numeric key to send the status message.

Targeted Status

If your Service Provider has enabled the Targeted Status
feature, the status sending display will show you the option of
sending your status to a private number or to a group.
To enter the private number, either key in the recipients
number or scroll through the list of numbers, or press abc to
search the contact list. For a group, select the group within
the folder. Then send the status message.
The display will show one of the following delivery reports:
•
Status Sent
•
Sts Failed
previous display.
is the last sent status.
Lunch
to view the status message. Press Back to
— the screen exits the status screen.
— the screen returns within a few seconds to the
Send Status.
Select Status
Lunch
Dinner
Meeting
Select
or the relevant one-
,
Back
119