Appendix; Specifications - Yamaha MG 6FX Owner's Manual

I General Specifications
Frequency Characteristics (ST OUT)
Total Harmonic Distortion (ST OUT)
1
Hum and Noise
Maximum Voltage Gain
Monaural/Stereo Input Gain Control
Monaural/Stereo High Pass Filter
Crosstalk (1 kHz)
Monaural Input Channel Equalization:
Max. Variation (CHs 1 to 8)
Stereo Input Channel Equalization:
Max. Variation (CHs 9/10 to 15/16)
Graphic Equalizer
Internal Digital Effects
Monaural/Stereo Input Peak Indicator
Level Meters
Phantom +48 VDC Power (Balanced input)
Included Accessory
Power Supply
Power Consumption
Max. Dimensions (W
Weight
Where 0 dBu = 0.775 V and 0 dBV = 1 V
1
Rs = 150 ohms
Measured with 12.7 kHz, –6 dB/oct. low pass filter (equivalent to 20 kHz, –∞ filter).
(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND)
2
Turning PAN/BAL to left or right.
3
Shelving turnover/rolloff frequency: 3 dB before maximum cut or boost.
MG16/6FX
28

Appendix

Specifications
20 Hz–20 kHz +1 dB, –3 dB @+4 dBu, 600
0.1% (THD+N) @+14 dBu, 20 Hz–20 kHz, 600
–128 dBu
–100 dBu
–88 dBu (92 dB S/N)
–81 dBu (85 dB S/N)
–64 dBu (68 dB S/N)
60 dB CH MIC INPUT
84 dB CH MIC INPUT
94 dB CH MIC INPUT
62.2 dB CH MIC INPUT
76 dB CH MIC INPUT
86 dB CH MIC INPUT
58 dB CH LINE INPUT
2
84 dB ST CH MIC INPUT
58 dB ST CH LINE INPUT
47 dB ST CH LINE INPUT
57 dB ST CH LINE INPUT
34 dB ST CH INPUT
16 dB AUX RETURN
9 dB AUX RETURN
27.8 dB 2TR INPUT
44 dB variable
80 Hz 12 dB/octave
–70 dB between input channels
–70 dB between input/output channels (CH INPUT)
±15 dB
HIGH 10 kHz shelving
3
MID 0.25–5 kHz peaking
LOW 100 Hz shelving
±15 dB
HIGH 10 kHz shelving
HI-MID 3 kHz peaking
3
LO-MID 800 Hz peaking
LOW 100 Hz shelving
7-band (125, 250, 500 1 k, 2 k, 4 k, 8 k)
Max. Variation ±12 dB
16 programs, parameter control
On each channel: red indicator lights if post-EQ signal (on ST channels, if either post-EQ sig-
nal or post-mic-amp signal) comes within 3 dB of the clipping level.
Two 12-point LED meters [Stereo (L, R)]
Peak point: red indicator
+5, +3, +1, and 0 points: yellow indicators
–1, –3, –5, –7, –10, –15, –20: green indicators
Supplied when Phantom +48 V switch is ON.
Power adaptor (PA-30)
USA and Canada:
Europe:
Australia:
Korea:
51 W
× × ×
H D) 423
5.5 kg
Equivalent input noise (CHs 1 to 8)
Residual output noise (ST OUT)
ST, GROUP Master fader at nominal level; all Ch assign switches off.
AUX, EFFECT master control at nominal level; all channel mix con-
trols at minimum level.
ST, GROUP Master fader and one Ch fader at nominal level.
(CHs 1 to 8)
→
CH INSERT OUT
→
GROUP OUT/ST OUT (CH to ST)
→
ST OUT (GROUP to ST)
→
REC OUT (CH to ST)
→
AUX SEND (PRE)
→
AUX SEND (POST)/EFFECT SEND
→
GROUP OUT/ST OUT (CH to ST)
→
GROUP OUT/ST OUT (CH to ST)
→
GROUP OUT/ST OUT (ST to ST)
→
AUX SEND (PRE)
→
AUX SEND (POST)/EFFECT SEND
→
GROUP OUT/ST OUT (ST to ST)
→
ST OUT
→
AUX SEND
→
ST OUT
120 V AC, 60 Hz
230 V AC, 50 Hz
240 V AC, 50 Hz
220 V AC, 60 Hz
×
108 416.6 mm
Ω
(with gain control at minimum level)
Ω
(with gain control at maximum level)