Led And Beeper Indicators - Datalogic Magellan 1500i Quick Reference Manual

LED and Beeper Indicators

The scanner's beeper sounds and its green LED illuminates to
indicate various functions or errors on the scanner. The tables
that follow list these indications. An exception is that the scan-
ner's functions are programmable, and may or may not be turned
on. For example, some indications (such as the power-up beep)
can be disabled using programming bar code labels.
LED
INDICATION
Power-on
Bright green flash
indication
Good Read
Bright green flash
Indication
Scanner Constant dim
Ready green
Green LED slowly
and continuously
Sleep Mode
changes from off to
dim to off.
Constant green
flash at 1 Hz
Host Disable
(100mS on, 900mS
off)
Varies (see
Codes on page 16
Diagnostics
for more informa-
tion)
Constant green
Prog. Mode flash at 1 Hz (500
ms on, 500 ms off).
8
INDICATION
Error
COMMENT
Indicates the scanner has finished
all its power-up tests and is now
ready for operation.
Indicates a bar code has been read
and decoded.
The scanner is ready for operation.
The scanner is in Sleep Mode. To
wake the scanner up, move an object
in front of its window or press the
button atop the unit. This indication
is optionally configurable, and may
have been programmed to behave
differently.
The scanner is disabled due to
receiving a disable command from
the POS terminal.
The LED can provide diagnostic
feedback if the scanner discovers a
problem during SelfTest.
The scanner is in Programming
Mode.
Magellan™ 1500i