Digital Effects Section - Yamaha EMX5016CF Owner's Manual

Reference
Front & Rear Panels

Digital Effects Section

22
EMX5016CF Owner's Manual
SEND Jacks
• EFF1, EFF2
These unbalanced phone output jacks output the signal
from the EFFECT1/2 buses. You use these jacks, for
example, to connect to an external effector. You can
then return the signal by connecting the external effec-
tor to any of the LINE jacks on channel pairs 9/10 to
15/16.
If you are returning a signal from an external effector
into a LINE jack on any channel pair 9/10 to 15/16,
please be sure to turn the EFF1/2 knob for that chan-
CAUTION
nel pair to "0".
• AUX1, AUX2
These unbalanced phone jacks output monaural monitor
signals from the AUX1 and AUX2 buses, respectively.
You use these jacks, for example, to connect to an effec-
tor or to a cue box or other such monitoring system.
PROGRAM Dials
These let you select the type of effect from 16 different
types for EFFECT 1 and EFFECT 2. For details on
each of the effect types, refer to page 37.
PARAMETER Knobs
Each knob adjust the parameter (depth, speed, etc.)
associated with the selected effect type.
The mixer saves the last value used with each effect
NOTE
type. When you change to a different effect type, the
mixer automatically restores the value that was previ-
ously used with that type (regardless of the current
position of the PARAMETER knob).
AUX1/2 Knobs
Each knob adjusts the level of the effected sound into
the corresponding AUX1 and AUX2 buses.
EFF1/2 ON Switches/Indicators
Switches use of the internal effect on or off. The inter-
nal effect is applied only if this switch is turned on. To
set the switch on, press it in so that it lights up.
As an alternative to the ON switch, you can use a sepa-
rately sold FC5 foot switch to toggle the effector on
and off.
The On/Off status of the internal effects will be
NOTE
retained, even when you turn off the mixer's power.
PFL (Pre-Fader Listen) Switches
Set this switch on to feed the signal from the internal
digital effect signal (pre the EFF1/2 RTN faders) into
the PFL bus, so that it can be monitored at the
PHONES jack.
• The signal will not feed into the PFL bus if the
NOTE
effect's ON switch is turned off.
• The PFL ( , ,
the mix to be monitored at the PHONES jack. If
the channel's PFL or AFL switch is ON, the chan-
nel's output is mixed into the monitor signal to the
PHONES jack. If both switches are OFF, the chan-
nel output is not fed to the PHONES jack.
EFF1/2 RTN Faders
Adjusts the level of the effected sound into the Stereo
bus.
) and AFL switches select