Safety Precaution; Installation Environment - Ruijie RG-EG2100-P V2 Hardware Installation And Reference Manual

RG-EG2100-P V2 Hardware Installation and Reference Guide

Safety Precaution

The breakout gateway acts as the critical transfer station of network connections, and its normal service is crucial to the
normal operation of the entire network.

Do not place the device in a watery place and prevent any liquid from entering into it.

Keep the device away from heat sources.

Ensure the normal grounding of device.

Wear an anti-static wrist strap to install and maintain the device.

Do not wear loose clothes to avoid hooking any parts. Before operation, tighten your band, shawl and sleeves.

Keep tools and parts away from the walkway to avoid damage.

Use the uninterruptible power supply (UPS) to avoid power failure and other interferences.

If the system time is incorrect, check whether you have set the clock. If the clock is not set, the time may not be
correct; if the clock has been set precisely and the time is still incorrect, the built-in button cell of device may have ran
out, which is typically happened after 10-year service.

Install and use the device in restricted access locations.
Use of wrong battery may cause damage to the device. Do not replace the battery by yourself. Please
contact the technical support for help.
This is a Class-A product which may cause radio interference in the living environment. In such a case, the
user may need to take feasible measures against such interference.
Install and use the device in restricted access locations.
Invite professionals and related technicians to install this type of device.

Installation Environment

Ruijie EG series breakout gateway products are for indoor use only. To ensure normal operation and prolong their service
life, the installation site must meet the following requirements:
Preparation
Preparation