Table of Contents
Advertisement
Operation
9.
Air filter
Check the fixing screws. Retighten any loose screws.
10.
Battery terminals
Retighten any loose battery terminals.
11.
Seat belt
WARNING
Danger of injuries! Any seat belt which has been damaged or
stretched as a result of an accident must be replaced.
Have the safety belt be replaced at a garage, if it is damaged or
if the machine had an accident.
The belt strap must not be twisted, trapped or rub against sharp
edges. The belt buckle catch must not be blocked by paper or
similar as this would prevent the belt buckle from locking into place
when inserted.
Keep the belt clean and check whether the belt holder is properly
attached.
Replace the seat belt if either the belt or the belt holder has been
damaged or deformed.
12.
ROPS
Check for loose or damaged bolts. Bolts may only be retightened
or replaced by a Komatsu dealer. Loose bolts must only be
retightened with the correct torque. Damaged bolts may only be
replaced with OEM parts.
13.
Cabin windows
Clean the cabin windows before starting work.
Perform the steps described in "MAINTENANCE PRIOR TO
STARTING".
(See maintenance plan in section 3)
2 - 36
Advertisement
Table of Contents
