Get Connected - First Data FD100 Quick Setup Manual

Let's get started...
Typical set-up time: 15-20 minutes
Where to put the FD100 Terminal
Place the terminal on a desk or tabletop. Avoid areas
with direct sunlight or objects that radiate heat, excessive
dust, and electrical devices that cause excessive voltage.

Get connected

You may choose an IP connection (DSL or Cable) or dial-up
through a dedicated phone line. If you choose dial-up, you
can use the same line as your fax machine or any other
jack not plugged into a phone system or LAN (Local Area
Network). You must use a dedicated phone line.
)
6
DSL
COM2
ROUTER
COM1
DSL
OUTLET
MODEM
ETHERNET CABLE
PHONE CORD
( (
7 3