AT&T MLS-12D Manual page 5

[Feature] [0] [2]
[Feature] [0] [3]
[Feature] [0] [4]
[Feature] [0] [5]
[Feature] [0] [6]
[Feature] [0] [8]
[Feature] [0] [9] + Ext. Number
[Feature] [1] [0] + Ext. Number
[Intercom] [6] + Ext. Number
[Intercom] [6] [6]
[Intercom] [7] [0]
[Intercom] [7] [1]
[Intercom] [*] [7] [1]
Can use this feature only if
programmed onto a button
with lights (see page 4).
Dial Code Features
You can use a Dial Code feature in either of two ways:
Press [Feature] followed by its 2-digit Dial Code (except Do
Not Disturb and Privacy).
Press a button programmed with the feature (see "Program-
ming" on page 4).
Feature
Do Not Prevents any calls from ringing at your phone.
Disturb Transferred calls return to sender and inside
calls get a busy signal. Outside callers hear the
usual ringing. Recommended only if someone
else answers your outside calls. To use this
feature, you must program [Feature] [0] [1] on a
button with lights.
Exclusive Hold Places a call on hold so other extensions with
the line cannot pick it up.
Recall "Recalls" a dial tone. If you are not on a PBX or
Centrex system, use Recall to end a call without
hanging up-you will get a dial tone and can then
make another call. Otherwise, use Recall to get
the PBX/Centrex dial tone.
Saves the last number you dialed into a tempo-
Save Number
Redial rary memory. Before you hang up on a busy or
non-answering call, press [Feature] [0] [4] . Once
saved, you can radial it at any time by pressing
[Feature] [0] [4] again. The number stays in the
memory until a different one is saved. System
Speed Dial numbers cannot be saved.
Redials the last number you dialed (except
Last Number
Redial System Speed Dial numbers).
Conference Drops the last outside party added to a
conference call.
Drop
Privacy Prevents other people with the same line from
joining your calls. To use this feature, you must
program [Feature] [0] [7] on a button with lights.
Touch-Tone When on a rotary line, allows you to across
Enable phone services such as "Bank-by-Phone" that
require you to dial digits. After you make the call
to the service and are asked to enter touch-tone
digits, turn on Touch-Tone Enable to change the
rest of the digits you dial to touch-tone.
Turns on the message Iight on another MLS
Message
Light On phone (you manually enter the extension).
Message Turns off the message light on another MLS
Light Off phone (you manually enter the extension).
Call Pickup Picks up a call ringing at any system extension.
Pickup Group Picks up an outside call ringing at any Pickup
Group extension.
Connects you to the (optional) loudspeaker
Loudspeaker
Paging system.
Group Calling Simultaneously rings all Calling Group
extensions; you connect to the first extension
that answers.
Group Paging Simultaneously voice signals all Calling Group
extensions; you connect to the first extension
that answers.
5
Use