Subscribe to Our Youtube Channel
Related Manuals for Campbell CR10TCR
Summary of Contents for Campbell CR10TCR
- Page 1 CR10TCR THERMOCOUPLE REFERENCE REVISION: 12/96 COPYRIGHT (c) 1995-1996 CAMPBELL SCIENTIFIC, INC.
- Page 2 This is a blank page.
- Page 3 CAMPBELL SCIENTIFIC, INC. CAMPBELL SCIENTIFIC, INC. will return such products by surface carrier prepaid. This warranty shall not apply to any CAMPBELL SCIENTIFIC, INC. products which have been subjected to modification, misuse, neglect, accidents of nature, or shipping damage.
- Page 4 This is a blank page.
- Page 5 1. GENERAL add to an accuracy of ±0.4°C over the range of -24° to 48°C and ±0.9°C over the range of The Model CR10TCR Probe contains a -38°C to 53°C. The major error component is thermistor for measuring temperature and is...
- Page 6 3. INSTALLATION AND WIRING polynomial. A multiplier of 1.0 and an offset of The wiring diagram for the CR10TCR is shown 0.0 yields temperature in Celsius. For Fahrenheit, in Figure 1. The probe requires a single-ended use a multiplier of 1.8 and an offset of 32.
- Page 7 AC power lines can be the source of electrical -22.00 1251079 -22.05 noise. If the datalogger is in an electronically -20.00 1106485 -20.00 noisy environment, the CR10TCR temperature -18.00 980100 -17.97 measurement should be measured with the AC -16.00 869458 -15.95 half bridge (Instruction 5) with the 60 Hz rejection -14.00...
- Page 8 CR10TCR THERMOCOUPLE REFERENCE This is a blank page.
Need help?
Do you have a question about the CR10TCR and is the answer not in the manual?
Questions and answers