Advertisement
10.) Remove the Tray with Harness. Note: Be sure to clear tray above rear supports when removing.
Note: If the Tray is difficult to remove, the tray mounting screws on the lower trays can be
loosened to ease removal.
CAUTION! TRAY WEIGHS APPROXIMATELY 30 LBS.
Figure 15
INSTALLATION OF AN ENTRAY TRAY:
11.) Place the Entray Frame Assembly (645,070,00x.x3) into the vender so that it rests on all four tray
supports. USE CARE NOT TO PINCH, PULL OR CHAFE THE FRAME WIRE HARNESS/CONNECTOR
(See Figures 16 Thru 19).
Tray Frame
Frame Harness
Figure 16
Page 9 of 34
Advertisement
