Advertisement
19.) Insert the helix, to be used in each column, to the motor at the back of the column by inserting the
adapter helix to motor (801,810,21x.x1) in to the motor socket so the vertical leg on the back of the helix
is as close to the 12 o'clock position as possible. The end of the bar (single) helix locates approximately
at the 5-6 o'clock position and the bag (double) helix locates approximately at the 7-8 o'clock position for
a left helix and 4-5 o'clock for a right helix to ensure proper vending. See figures 30 and 31.
Figure 30
Helix end at 5-
6 o'clock.
Bar Tray Assembly
Vertical leg at
approximately
12 o'clock
Spacer bar located
on left side.
Left Helix end at
7-8 o'clock.
Right Helix end
at 4-5 o'clock.
Figure 31
.
Bag Tray Assembly
Page 16 of 34
Advertisement
