Advertisement
Figure 22
14.) Plug the Mini-Fit Connector on the Frame Harness into the matching Jumper Harness
(804,923,21x.x1) provided in the kit (used only on Wide Vender Tray Kits, for Narrow Vender Tray Kits
skip steps 14 and 16). Match the letters on the Adapter Harness with the tray level letters (i.e. A, B or C)
as shown in Figures 23 & 24.
Minimize the remaining slack
on the Snack Frame Harness
in the product area.
Jumper Harness
Figure 23
Page 12 of 34
Advertisement
