Advertisement
32.) Secure the Recovery Unit quick connect bracket (645,070,27x.x3) to the Recovery Unit as shown in
Figures 48 & 49.
Figure 48
Figure 49
Slide Recovery Unit Bracket down to
meet Recovery Unit Flange; next tighten
the two (2) screws to the Entray
Segmented Delivery Assembly.
Tighten two (2) screws to Entray
Segmented Delivery Assembly.
Drive two (2) self drilling
screws which secure the
Recovery Unit Bracket to the
Recovery Unit Flange.
Recovery Unit Bracket
Recovery Unit Flange
Page 25 of 34
Advertisement
