Maytag Dixie-Narco Beverage Max DN55 Series Instructions Of Instalation And Use page 31

40.) Remove the Snap Ferrite from the Cabinet Quick Connect harness (it will be installed in step 43) and
route the harness through the "E" Tray Harness hole similar to the way the Frame harness is routed as
outlined in Figures 20 & 21.
Figure 62 Figure 63
Cabinet Quick Connect Harness
41.) Plug the Cabinet Quick Connect Harness into the Vend Sensor Connector on the Control Board
(Reference Figure 27).
Figure 64
Page 31 of 34