Changing The Needles - Necchi L234A Instruction Manual

Changing the needles

2
1
1. Turn the hand wheel toward you until the
2. Loosen, but do not remove the left or right
3. Remove the left or right needle,
4. Hold the new needle(s) with the flat
5. Insert the needle(s) into the left and/or
6. Securely tighten the left or right needle
6
n Attention
Turn off the main power switch and unplug
the machine.
needles are at the highest position.
needle clamp screw with the allen key
while you are holding the needles.
depending on the stitch type you want to
sew.
surface to the back.
right needle clamp as far as it/they will go.
clamp screw.
Right needle clamp screw
1
Left needle clamp screw
2
Note
When using both needles, the left needle
is positioned a little higher up than the right
needle (they are not supposed to be 'level',
like a twin needle).