Stitch Width Settings; Stitch Length Settings - Necchi L234A Instruction Manual

Stitch width settings

1

Stitch length settings

2
1
21
The stitch width can be increased or
decreased by changing the needle position or
with the cutting width lever.
Width adjustment by changing needle
position
When only the left needle, or when both
1
needles are used the stitch width is
approx. 6mm (1/4").
When only the right needle is used the
2
stitch width is approx. 3mm (1/8").
Width adjustment with the cutting width
lever
By fine tuning the cutting width, using the
cutting width lever, adjustments are possible
within the range shown below:
When only the left needle is used: 5 - 7mm
When only the right needle is used: 3 - 5mm
Move the lever up and down to adjust the stitch
width, "7" is the widest and "1" is the most
narrow setting.
Cutting width lever
1
The stitch length dial should be set to "3" for
most sewing.
Adjust the stitch length to 4mm when sewing
on heavy weight fabrics. Adjust the stitch
length to 2mm when sewing on light weight
fabrics.