Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Razer Ripsaw HD
Summary of Contents for Razer Ripsaw HD
- Page 1 How do I set up my Razer Ripsaw HD? To properly set up the Razer Ripsaw HD, follow the steps below: Ripsaw HD Basic Layout: Step-by-Step Process: 1. Connect the included HDMI cable from the HDMI port of your PC or gaming console to...
- Page 2 3. Connect the included USB 3.0 Type-C to Type-A cable from the USB 3.0 port of your recording PC to the Type C port of the Razer Ripsaw HD. The status indicator of your Razer Ripsaw HD will light up to indicate that it is now powered on.
- Page 3 4. Connect an analog audio output device (such as a headphone) to the headphone port. This will allow you to listen to all audio being captured or streamed by the Razer Ripsaw HD at the same time.
- Page 4 How do I record my game audio using the Razer Ripsaw HD game capture card? To record audio using the Razer Ripsaw HD via OBS, please follow the steps below: 1. Ensure that your setup is correct, please see How do I set up my Razer Ripsaw HD? 2.
- Page 5 4. In the Create/Select source window, select “Create New” and click “OK”.
- Page 6 5. In the Properties window, select “Microphone (Razer Ripsaw HD HDMI)” and click “OK”. 6. You should now be able to record your game audio. You can confirm that OBS is receiving audio when you see the green bars under “Audio Input Capture”. To monitor or to hear the audio through your streaming PC, open the “Advanced Audio Properties”...
- Page 7 “Audio Monitoring” section for the “Audio Input Capture” to be able to both monitor and record/stream your game audio. Common Questions Where can I find the serial number on my Razer Ripsaw HD? The serial number can be found at the bottom of the unit.
- Page 8 How long are the HDMI and USB cables that come with the Razer Ripsaw HD? The HDMI and USB cables are 2 meters (6+ feet) long. How can I stream audio from my game through the Ripsaw HD to my streaming PC, as well as pick it up on my headset? We recommend using a digital audio splitter like Voicemeter, which is really easy to use - it essentially sends audio both to your Ripsaw and headset or speakers.
- Page 9 PS4, go to Settings > System and navigate to "Enable HDCP" and uncheck the box. I lost the USB cable that came with the Razer Ripsaw HD, can I use a generic USB Type-C cable? It is recommended to use the cable that came with the box. However, a good quality USB-C cable that is able to support data may work.
- Page 10 Can I buy a longer HDMI cable for the Razer Ripsaw HD? Yes. If needed you can use longer HDMI cables that can be purchased from third-party providers. Be sure to get a quality cable as Razer cannot be responsible for overall performance if the enclosed cable is not used.
- Page 11 How to configure your graphics card to output 60FPS/60Hz Intel Integrated Graphics Card 1. Right-click desktop properties and select “Intel Graphics Settings”. 2. Select Ripsaw HD as the display and change the refresh rate to 60p Hz. 3. Click on “Apply” to save changes. Nvidia Graphics Card 1.
- Page 12 What resolutions are supported by the Razer Ripsaw HD capture card? The Razer Ripsaw HD can record up to 1080p resolution at 60 frames per second. It can also pass-through up to 2160p resolution at 60 frames per second. Other support resolutions are...
- Page 13 PS4, go to Settings > System and navigate to "Enable HDCP" and uncheck the box. I lost the USB cable that came with the Razer Ripsaw HD, can I use a generic USB Type-C cable? It is recommended to use the cable that came with the box. However, a good quality USB-C...
- Page 14 Why can’t I select 1440p on my Xbox One when using Ripsaw HD as a pass-through device? Ripsaw HD can only support 1440p resolution at 30 fps and Xbox One does not support 1440p at 30fps. In this case, the resolution is downscaled to 1080p at 60 fps.
- Page 15 Ideally, your Video Bitrate should be over 6000 Kbps and your Encoder set to “Hardware (NVENC)”. 4. While in the Settings menu, go to Audio and under Mic/Auxiliary Audio, specify “Razer Ripsaw HD HDMI”.