How To Configure Your Graphicscard To Output 60Fps/60Hz - Razer Ripsaw HD Manual

What streaming software are supported by the Razer Ripsaw HD?
We recommend that you use Xsplit or OBS with the Ripsaw HD.
Ripsaw HD - How to configure your graphics
card to output 60FPS/60Hz
If you notice that your graphics card is not outputting 60FPS as it should be, you may need to
manually configure it to achieve the desired output. Follow the steps below:
How to configure your graphics card to output 60FPS/60Hz
Intel Integrated Graphics Card
1. Right-click desktop properties and select "Intel Graphics Settings".
2. Select Ripsaw HD as the display and change the refresh rate to 60p Hz.
3. Click on "Apply" to save changes.
Nvidia Graphics Card
1. Right-click desktop properties and select "Nvidia Display Settings".
2. Navigate to Display and Select "Change resolution".
3. Select Ripsaw HD as the display you would like to change.
4. Set the Refresh rate to 60Hz.
5. Click on "Apply" to save changes.
AMD Graphics Card
1. Right-click desktop properties and select "Display Settings".
2. Choose Ripsaw HD as the display.
3. Click on "Display adapter properties for Display".
4. Navigate to the "Monitor" tab.
5. Set the refresh rate to 60 Hz.
6. Click "Apply" to save changes.
When I use screen capture/streaming
software like OBS, XSplit, etc. and select
Razer Ripsaw HD as a capture source, I only
see a black screen