Specifications - Yamaha mc-1202 Operating Manual

SPECIFICATIONS

Total Harmonic Less than 0.1%, 20Hz – 20kHz @ +14dB
Distortion into 600 ohms.
Frequency Response +1, –3dB, 20Hz – 20kHz @ +4dB into
600 ohms
–128dB
Hum and Noise* (20Hz
– 20kHz, Rs=150 ohms, –90dB
Input Gain max., Input
Pad @ 0dB, Input
–73dB
Sensitivity –60dB)
–64dB
–70dB
–64dB
Maximum Voltage Gain 84dB CH IN to STEREO OUT
84dB CH IN to AUX SEND 1
94dB CH IN to AUX SEND 2, 3
20dB AUX RETURN 1, 2 to STEREO OUT
10dB SUB IN to AUX SEND 1 – 3
10dB SUB IN to STEREO OUT
Input Channel Gain Control
~
–20 –60dB variation in gain, stop to stop.
Input Channel Pad Switch
0/20dB of attenuation.
Input Channel Equalization
15dB maximum boost or cut in each of three bands.
HIGH: 10kHz (shelving)
MID: 350Hz – 5kHz (peaking)
LOW: 100Hz (shelving)
–60dB at 1 kHz, adjacent input channels.
Crosstalk
–60dB at 1 kHz, input to output.
VU Meters (0 VU = +4dB Output)
3 illuminated meters,
STEREO L, STEREO R, AUX1/AUX2/AUX3/CUE (switchable)
Clip Indicators
RED LED built into each input channel. Lights when post-EQ
channel signal is 3dB below clipping level.
equivalent input noise.
residual output noise (balanced
outputs).
at STEREO OUT with master
fader at nominal level and all
channel faders at minimum level.
at STEREO OUT with master
fader and one channel fader at
nominal level
at AUX SEND with AUX SEND
level control at nominal level
and all channel AUX controls at
minimum level.
at AUX SEND with AUX SEND
and, one AUX control at nominal
level,
Phantom Power
+48 VDC applied to electronically balanced inputs via 6.8 k-ohm
limiting resistors. Master ON/OFF switch.
Power Requirements
U.S.&Canadian models: 120V AC, 60Hz
110 – 120/220 – 240V AC, 50/60Hz
General model:
Power Consumption MC1602:
MC1202:
MC802:
Dimensions (W x H x D)
MC1602: 730 mm x 151 mm x 531 mm
(28-3/4" x 6" x 20-7/8")
MC1202: 590 mm x 151 mm x 531 mm
(23-1/4" x 6" x 20-7/8")
450mm x 151 mm x 531 mm
MC802:
(17-3/4" x 6" x 20-7/8")
Weight MC1602: 18 kg. (39.7 Ibs.)
MC1202: 15 kg. (33.1 Ibs.)
MC802: 12 kg. (26.4 Ibs.)
*
Measured with a –6dB/octave LPF @ 12.7kHz.
•
0dB = 0.775Vr.m.s.
•
Specifications subject to change without notice.
60 watts
60 watts
40watts
14