Application Example - Yamaha mc-1202 Operating Manual

APPLICATION EXAMPLE

In the system shown below the MC1602 is used as the main
console in a sound reinforcement system. Three vocal micro-
phones, six drum microphones, a microphone from the guitar
amplifier and another from the bass amplifier are connected
to 11 of the 16 available LO-Z inputs. The line-level stereo
outputs from an on-stage keyboard mixer and the stereo
outputs from an electronic percussion system are fed to four
HI-Z inputs. A total of 15 input channels are thus used, leav-
ing one free — just in case. The AUX 1 mix system feeds
on-stage power amplifiers and monitor speakers for the
11
performers. The AUX 2 system is used to drive a digital
reverb/effects unit to add ambience and effects where neces-
sary. The AUX 3 system feeds a tape recorder to make a
rough mono recording of the performance. The STEREO
OUT connectors drive the main house power amplifiers and
speaker system.
This is just one possible way of setting up the MC1602 for
a sound reinforcement application. The actual setup you use
will, naturally, be dictated by your own particular system
requirements.