Operation Instructions - Health O Meter PROPLUS User Instructions

OPERATION INSTRUCTIONS

In the menu screen the user can set preferences and/or instruct the scale how to handle stored data.
The menu can be navigated using the up and down keys (▲▼) or by entering the associated menu
position number with the keypad. The menu has a ― roll-over‖ way of working: when the user scrolls to
the bottom of the menu and presses the down button, it will return to the top of the menu.
NOTE: The default mode of the scale is set so the menu option is locked out. If the menu button is
pushed before activating the menu option, ― MENULOCK‖ will show on the display. To temporarily
reactivate the use of the MENU key, press and hold the MENU key for 5 seconds. During the menu
access delay, the menu will display ― MENULOCK‖. After 5 seconds, the menu will show on the display
and you may begin navigating through the menu as follows:
Indicator of menu position
Active menu option is
marked by inverted color
01 WEIGHT DISPLAY MODE
(only applies to pound values, NOT metric values)
Before making changes to this scale setting, please refer to ― Menu‖ instructions above to temporarily
activate the Menu key.
The user can set the screen display value in either fraction of pound (¼, ½ or ¾ lb), in pounds and ounc-
es (resolution of 4 ounces) or in decimals (resolution of 0.2 lb). When kg is selected as the units of use,
these settings have no effect. The mode that is selected is used through all the screens.
01-Display Mode
01-Fraction Pounds
02-Pounds & Ounces
03-Decimals
▼▲ to change
MENU
MENULOCK
Main Menu
→
01-Weight Disp Mode
02– Tare Weight
03– Data Management
▼▲ to change
04-Scale Settings
05-System Settings
06-System Test
07-User Setting
08– Exit
▲
▼
Enter
9
▲
Scroll through the menu
options with ▲ and ▼ keys
▼
Enter
10/14/2009
185
11:30pm
3
lb
4