Health O Meter PROPLUS User Instructions page 13

OPERATION INSTRUCTIONS
02 Sleep Time
02-Sleep Time
01:00
Minutes
Enter
03 Auto Off Time
03-Auto Off Time
10
Minutes
Enter
04 Tone Volume
04-Tone Volume
01-Keypad Tone
02-Stable Weight
03-Alarm Tone
▼▲ to change Enter
Set Volume
0
▼▲ to change Enter
The user can set the time elapsed
before the scale goes into the sleep
mode. The default is 1 minute. When
the scale goes into sleep mode,
STANDBY is displayed on the
screen. The maximum setting is10
minutes Sleep Time. Use the keypad
to enter the desired amount of time
and then press the ENTER key.
The user can determine how long the scale will operate
before turning off automatically due to inactivity. Default
time is 10 minutes. If the value is set to zero, the auto off
function is disabled. The maximum setting is 60 minutes
Auto Off Time. Use the keypad to enter the desired
amount of time and then press the ENTER key.
There is an option to adjust the beeping tone of the scale.
▲
This tone should sound when the scale has determined the
weight on the platform, when a key is pressed, after the
scale is turned on, at the end of self-test, or in the case of
fault or warning. Press the ENTER key to set the volume.
▼
Press the EXIT key to return to the Scale Settings menu.
Use the ▲ and▼ keys on the keypad to adjust the
volume. Whenever the user presses the key to change a
10
volume, a beep will sound to indicate the set volume
level. If 0 is selected, the tone is disabled.
13
STANDBY