Maintenance; Exploded Diagram - Health O Meter PROPLUS User Instructions

MAINTENANCE

GENERAL
This section provides instructions for maintenance, cleaning, troubleshooting and operator replaceable
®
parts for ProPlus Display Modules. Maintenance operations other than those described in this section
should be performed by qualified service personnel.
MAINTENANCE
Before first use and after periods of non-use. Check display for proper operation and function. If the dis-
play does not operate correctly. Refer to qualified service personnel.
1. Check overall appearance of the display for any obvious damage, wear and tear.
2. Inspect the AC Adapter for cord cracking or fraying or for broken or bent prongs.
3. See parts list on page 22 if replacement parts are required.
CLEANING
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Disconnect the scale from the AC power source.
1. Clean all external surfaces with a clean damp cloth or tissue. Anti-bacterial soap and water may be
used. Dry with a clean soft cloth.
2. Do not immerse the display into cleaning or other liquid solution.
3. Do not use Isopropyl Alcohol or other cleaning solutions to clean the display.
4. Do not use abrasive cleaners.
EXPLODED DIAGRAM– DISPLAY MODULE
1 2
22 21
3 4 5
20 19 18
17
20
7
6
8
16 15
9
10
14 13 12 11